A steel cable connects to the rear wheel brake shoes or friction pads. When the handbrake is pulled, the cable tightens the brake shoes, causing them to clamp against the brake hub or disc through friction, thereby generating braking force.
Specific Structure and Operation
Mechanical Handbrake: The cable directly actuates the rear wheel brake calipers. Pulling the handbrake causes the calipers to press against the brake pads.
Electronic Handbrake: An electric motor drives the cable to actuate the brake calipers, operating on a principle similar to the mechanical type.
Usage Precautions
Avoid fully engaging the handbrake: Overstretching the cable or maintaining a prolonged tightened state can cause plastic deformation, reducing braking effectiveness.
Effective Travel: Typically, pulling the handle to 70% of its height is sufficient. The ratchet click indicates the correct position.
Applicable Scenarios
Primarily used to prevent vehicle rollback when stationary, especially when parking on slopes where it should be used in conjunction with the gearshift.





