Core Material Selection for Insulated Pole Connectors
Insulated pole connectors must simultaneously meet mechanical strength and insulation performance requirements. Current mainstream materials include:
Epoxy Resin: Flexural strength ≥120MPa (per GB/T 1043-2008), voltage resistance up to 30kV/mm, commonly used in high-voltage operation scenarios;
Glass-fiber reinforced plastic: Low density (1.8–2.1 g/cm³), tensile strength ≥300 MPa, suitable for portable insulated poles;
Silicone rubber: Excellent elasticity and weather resistance, but lower mechanical strength, primarily used for joint sealing layers.
Joint Types and Application Scenarios
Classified by connection method into three categories:
Threaded Joints: Utilize precision thread engagement with pull-out resistance >5kN (IEC 60855 standard), suitable for long-term fixed aerial work equipment;
Snap-Fit Joints: Feature quick-release design with assembly time <10 seconds, but offer limited load capacity (<2kN), ideal for emergency repairs;
Quick-connect/disconnect joints: Feature self-locking mechanisms with IP67 waterproof rating (GB/T 4208-2017), primarily used in humid environments.
Key Performance Parameters and Standards
Electrical performance: Leakage current must be <1mA at 10kV voltage (DL/T 878-2021);
Mechanical Life: Threaded connectors must withstand ≥5000 insertion/extraction cycles without deformation;
Environmental Adaptability: Insulation resistance >1000MΩ within -40℃ to +70℃ range (IEC 61109).
Selection Recommendations and Precautions
Prioritize epoxy resin + threaded combinations for high-voltage environments;
For frequent disassembly scenarios, recommend snap-fit or plug-in types with regular wear inspections;
Avoid mixing connectors of different materials to prevent electrochemical corrosion.




