Ball bearings are widely used in transmission systems, offering advantages such as low friction resistance, high limiting speeds, and low cost. Common types include the following four:
Deep Groove Ball Bearings
Characteristics: Primarily designed for radial loads, representing the most widely used type.
Applications: Deep groove ball bearings primarily handle radial loads but also perform well under combined radial and axial loads. Their low friction coefficient makes them suitable for high-speed operations. Their simple structure facilitates high precision, enabling mass production.
Deep Groove Ball Bearings
Angular Contact Ball Bearings
Features: High axial load capacity.
Applications: Offering high rotational speeds, high precision, and low noise/vibration, these bearings are primarily used in applications with significant axial forces where deep groove ball bearings are unsuitable.
Angular Contact Ball Bearings
Self-Aligning Ball Bearings
Features: Self-aligning capability
Applications: Self-aligning ball bearings are suitable for shafts prone to deflection or long shafts with poorly positioned bearing housing bores. However, due to their lower rigidity, they are best suited for applications with moderate speeds and no strict requirements for noise and vibration.
Self-aligning ball bearings
Thrust ball bearings
Features: Can only handle unidirectional axial loads
Applications: Designed for high axial load, low-speed conditions permitting high torque transmission.
Thrust ball bearings
In summary, the characteristics of the four ball bearing types are summarized in Table 1. Readers may select bearing types and allocate loads based on specific application conditions.




