These Inch Misalignment Insert Spacer normally assembly together with rod ends or spherical bearing, the swing angle can be increased.the spacer also provide assistance in installing in rods and forks of different widths.
Product Introduction
The Inch Misalignment Insert Spacer can be carbon steel,alloy steel, stainless steel or aluminum steel.
Technical Parameters
Inch Misalignment Insert Spacer
|
Part No. |
Dimensions inch |
||||
|
Inch reduce |
d |
D2 |
D1 |
L1 |
L2 |
|
MSP 3/8-5/16 |
0.3125 |
0.375 |
0.47 |
0.22 |
0.23 |
|
MSP 1/2-3/8 |
0.375 |
0.500 |
0.62 |
0.22 |
0.28 |
|
MSP 5/8-1/2 |
0.500 |
0.625 |
0.75 |
0.373 |
0.3 |
|
MSP 3/4-1/2 |
0.500 |
0.750 |
0.88 |
0.537 |
0.4 |
|
MSP 3/4-5/8 |
0.625 |
0.750 |
0.88 |
0.537 |
0.4 |
|
MSP 7/8-1/2 |
0.500 |
0.875 |
1.00 |
0.560 |
0.4 |
|
MSP 7/8-9/16 |
0.5625 |
0.875 |
1.00 |
0.560 |
0.4 |
|
MSP 7/8-5/8 |
0.625 |
0.875 |
1.00 |
0.560 |
0.4 |
|
MSP 1-9/16 |
0.5625 |
1.000 |
1.25 |
0.625 |
0.65 |
|
MSP 1-5/8 |
0.625 |
1.000 |
1.25 |
0.625 |
0.65 |
|
MSP 1-3/4 |
0.750 |
1.000 |
1.25 |
0.625 |
0.65 |
FAQ
Q: What is the Inch Misalignment Insert Spacer made of?
A: Stainless steel.
Q: What is the Metric Misalignment Insert Spacer made of?
A: Carbon steel with zinc plating.
Q: Are misalignment spacers adjustable?
A: Yes, they allow slight misalignment adjustment.
Q: Can Hi Misalignment Spacer prevent joint wear?
A: Yes, it helps reduce wear.
Q: Are both Inch and Metric spacers available?
A: Yes, both are available.
Hot Tags: inch misalignment insert spacer, China inch misalignment insert spacer manufacturers, suppliers, factory, joint accessory, hi misalignment spacer, stainless steel Misalignment Spacer, Inch Misalignment Insert Spacer
